0.96” OLED SCREEN

Vaping data is easy-to-read by the OLED screen that takes account of visual effect and high-grade appearance.

1600MAH BATTERY CAPACITY

QBOX is powered by a 1600mAh built-in rechargeable battery, with quick charge function which can be charged full in 1 .5~2h (1 A).

50W POWER

Maximum output power can up to 50W, and it supports VW/TC Mode. Moreover, its 51 0 connector compatibles with various tanks, so as to different flavors and clouds are available.

MULTIPLE PROTECTIONS

QBOX Kit provides multiple types of protections to safe guard against potential risk.

DRIP TIP INTRODUCTION

Re-designed bottom pair air-slots, air chamber and drip tip provide you with powerful draw effects.

ADJUSTABLE AIRFLOW SYSTEM

Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of atomizer.

COILS FAMILY

TOP REFILL SYSTEM

Top refill system makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.

HOW TO BUILD THE RBA

1 . Before starting make sure your hands are clean.
2. Taking RBA deck apart.

3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cutting the ends of wire off.

5. Cutting a strip of cotton and make sure it’s not too much and not too less.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the cotton at an angle and make sure it’s not too short and not too long.

8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically toensure the resistance remains the same.